About this deal
I.D. Hole Size: 1.440" [36.576 mm] to 1.584" [40.234 mm], Max Air Pressure: Up to 10 PSI, Hardware: ALL Stainless Steel, Rubber: Neoprene Specially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance.Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.Also used as a tamper resistant night cap to prevent unwanted material such as dirt, water, debris, animals, etc. from entering open ended pipes. This is critically important when protecting your expensive pipeline projects.These pipe plugs are composed of two steel washers, which are compressed together by tightening the central bolt using the Special Expansion Plug Wrench. I.D. Hole Size: 3.690" [93.726 mm] to 4.096" [104.036 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.210" [30.734 mm] to 1.331" [33.807 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene
Expansion seals or expansion joints as they are also known, provide a subtle yet crucial function in a wide variety of construction applications. The key purpose of an expansion seal is to provide a flexible connection point between two concrete, cement or similar structures. We specifically manufacture our TPE expansion seal profiles to provide excellent abrasion as well as impact resistance. This enables our expansion seals to provide a superior life expectancy compared to similar alternatives. I.D. Hole Size: 2.300" [58.420 mm] to 2.553" [64.846 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 2.920" [74.168 mm] to 3.241" [82.326 mm], Max Air Pressure: Up to 5 PSI, Hardware: ALL Stainless Steel, Rubber: Neoprene
Sort By
These Plugs and Stoppers are useful for all kinds of fabricating, sealing, finishing and masking uses within consumer and industrial related industries. Our rangeof Plugs and Stoppers has been produced with efficiency in mind, each having their own unique uses and characteristics. I.D. Hole Size: 1.920" [49.022 mm] to 2.142" [54.414 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene
I.D. Hole Size: 1.920" [49.022 mm] to 2.142" [54.414 mm], Max Air Pressure: Up to 5 PSI, Hardware: ALL Stainless Steel, Rubber: Neoprene I.D. Hole Size: 0.719" [18.263 mm] to 0.791" [20.089 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with stainless steel body, Rubber: Neoprene I.D. Hole Size: 1.810" [45.974 mm] to 1.991" [50.571 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.440" [36.576 mm] to 1.584" [40.234 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.190" [30.23 mm] to 1.309" [33.25 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene
There are different types of plugs on the market. The plugs are usually thin metal cups press fitted into the casting holes, but may be made of rubber or other materials. In I.D. Hole Size: 2.440" [61.976 mm] to 2.708" [68.973 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.060" [26.924 mm] to 1.166" [29.616 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 2.920" [74.168 mm] to 3.241" [82.326 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene
There are different types of plugs on the market. The plugs are usually thin metal cups press fitted into the casting holes, but may be made of rubber or other materials. In some high-performance engines the plugs are large diameter cast metal threaded pipe plugs. The image above is commonly known as a pipe, or hex plug. These are used in varying degrees of engineering projects.I.D. Hole Size: 0.937" [23.800 mm] to 1.031" [26.180 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene